Resetter MPTool 0.9.6 for Canon Printer Cannon, Printer, Fitness, Health. Resetter Printer Canon iP2770 Free Download Tools, Software, Free.

What is a product number. The MPTool is designed for service works with the printer Canon MP-Series when in Low-Level mode. It can be downloaded HERE: It will reset cartridges and data for printers below. Currently supported for MP150, MP160, MP170, MP180, MP450, MP460. MP150, MP160, MP170, MP180, MP450, MP460. BEFORE activating MPTool.you need to To activate LOW LEVEL mode: 1. Unplug the power cord to the printer for a moment.

Then, hold down the on/off button while plugging in the power cord. Keep holding the on/off button down. Right away the green power light (in the button) will turn on solid. Keep holding the on/off button down. Press and release the Stop/Reset button. (the button w a red triangle in a red circle) 5.

Now you can release the on/off putton. The green power light will go off and the yellow Alarm light will stay on. Serial number for flip4mac 333 2. Now you can run MPTOOL and resetting the ink counters will work. Your printer will show up as 'another' Cannon printer. When you finish you must again unplug the power cord for a moment and then just plug it back in. After you do this, you'll see both printers listed in Printers (controll panel) and one will show as offline. You can then rename this offline printer as 'Low Mode Canon' or whatever works for you so you don't mix it up with other functions.

These instructions took some time to translate from Russian, so I hope you enjoy! ButtWeasel (Feel free to contact me if you have questions or if the link is no longer valid.). Hello, I'm new to this forum. I've just used mptool, having put an MP150 in low level mode first.

The mptool is said to have worked on the MP150 by danlcc in another forum. I've reset everything with mptool, but still when returning the printer to normal mode I get the error E5 message. If I run mptool again, I still get 100% on all cartridges. If I read the MP150 eeprom with mptool I get a small file of 512 bytes consisting of a single repeated datum. This is obviously not the printer's firmwear. Maybe there's a communication problem between mptool and the printer. Any suggestions?

I've just used mptool, having put an MP150 in low level mode first. The mptool is said to have worked on the MP150 by danlcc in another forum. I've reset everything with mptool, but still when returning the printer to normal mode I get the error E5 message. If I run mptool again, I still get 100% on all cartridges.

If I read the MP150 eeprom with mptool I get a small file of 512 bytes consisting of a single repeated datum. This is obviously not the printer's firmwear. Maybe there's a communication problem between mptool and the printer. Any suggestions?